gavindiaz/strategies
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
master
strategies/基于Hull-MA与STC指标的趋势跟踪策略Trend-Following-Strategy-Based-on-Hull-MA-and-STC-Indicator.md
T
root 87a415edf7 update
2024-03-03 22:27:55 +08:00

26 KiB
Raw Permalink Blame History

Name

基于Hull-MA与STC指标的趋势跟踪策略Trend-Following-Strategy-Based-on-Hull-MA-and-STC-Indicator

Author

ChaoZhang

Strategy Description

[trans]

概述

该策略结合了Hull MA平滑移动平均线与STC指标,实现了对趋势的精确跟踪。当Hull MA线颜色转绿,并且STC指标由红转绿且低于25时,实现做多开仓;当Hull MA线颜色转红,且STC指标由绿转红且高于75时,实现做空开仓。同时,策略还集成了UT Bot指标,进一步确认趋势信号。

策略原理

策略使用Hull MA平滑移动平均线判断价格趋势方向。Hull MA线颜色可根据价格转绿或转红来实现对趋势转向的判断。

STC指标类似于MACD指标,其指标线可判断多空转折。当指标线由下向上突破25时,为买入信号;从上向下跌破75时,为卖出信号。

结合Hull MA指标与STC指标,当两者指标同步发出买入/卖出信号时,即可判断趋势转折,进行交易操作。

此外,策略还引入了UT Bot指标,该指标基于价格与ATR动态止损线的关系,输出多空姿态信号,可用来进一步确认趋势信号。

具体来说,策略逻辑为:

  1. Hull MA线颜色转绿且STC指标线由红转绿,低于25时,为做多信号

  2. Hull MA线颜色转红且STC指标线由绿转红,高于75时,为做空信号

  3. 在满足上述条件时,需要同时判断UT Bot指标为多头状态,才可开多单

  4. 在满足上述条件时,需要UT Bot指标为空头状态,才可开空单

优势分析

该策略综合运用了3个指标判断趋势,可提高信号的可靠性。

Hull MA平滑曲线可准确判断趋势方向,避免whipsaw。 而STC指标可捕捉趋势转折点,增强策略的实时性。UT Bot可进一步过滤假信号。

三种指标的组合,可实现对趋势的精确跟踪,同时提高稳定性。这是该策略的最大优势。

风险分析

策略主要风险有:

  1. STC指标容易产生假信号,导致不必要的开仓

  2. Hull MA指标参数设置不当也会误判趋势

  3. 三个指标组合使用不当,会相互干扰

可以通过优化Hull MA参数,调整STC参数组合,测试UT Bot参数,来减小误判风险。

此外,可设置止损来控制单笔损失。也可以引入更多指标组合进行验证,降低假信号率。

优化方向

该策略可从以下方面进行优化:

  1. 优化Hull MA参数,寻找最佳长度,使平滑曲线更符合趋势

  2. 调整STC参数组合,找到更准确判断转折的参数组合

  3. 优化UT Bot参数,提高对趋势的判断准确性

  4. 测试引入其他指标进行组合,进一步验证信号可靠性

  5. 优化止损策略,在保证盈利的前提下,将单笔损失控制在可承受范围

  6. 优化仓位管理策略,让盈亏比更高

总结

该策略通过Hull MA,STC和UT Bot三个指标的配合使用,实现了对趋势准确跟踪的效果。策略具有指标组合多样性的优势,可减少误判风险,提高稳定性。通过持续优化指标参数、考察其他指标引入、完善止损策略等方式可进一步增强策略效果。

||

Overview

This strategy combines Hull MA smooth moving average and STC indicator to precisely track the trend. It goes long when Hull MA line turns green and STC indicator turns from red to green and is below 25; it goes short when Hull MA line turns red and STC indicator turns from green to red and is above 75. Meanwhile, the strategy also integrates UT Bot indicator to further confirm trend signals.

Strategy Logic

The strategy uses Hull MA smooth moving average line to determine the price trend direction. The color change of Hull MA line from green to red or vice versa can be used to judge the trend reversal.

The STC indicator is similar to MACD indicator. Its indicator line can be used to determine bullish/bearish reversals. When the indicator line breaks above 25 from below, it's a buy signal; when it breaks below 75 from above, it's a sell signal.

By combining Hull MA and STC indicators, when both indicators concurrently generate buy/sell signals, it indicates a trend reversal for trade entry.

In addition, the strategy also incorporates the UT Bot indicator, which outputs bullish/bearish bias based on the price's relationship with the dynamic stop loss line based on ATR, to further confirm trend signals.

Specifically, the strategy logic is:

  1. When Hull MA line turns green and STC indicator line turns from red to green, below 25, it's a long signal.

  2. When Hull MA line turns red and STC indicator line turns from green to red, above 75, it's a short signal.

  3. When above criteria are met, require UT Bot shows bullish to open long position.

  4. When above criteria are met, require UT Bot shows bearish to open short position.

Advantage Analysis

The strategy combines 3 indicators to determine the trend, which can improve the reliability of signals.

The smooth Hull MA curve can accurately determine the trend direction and avoid whipsaws. The STC indicator can capture trend reversal points to enhance the real-time performance of the strategy. UT Bot can further filter out false signals.

The combination of the 3 indicators enables precise trend tracking while enhancing stability. This is the biggest strength of the strategy.

Risk Analysis

Main risks of the strategy:

  1. STC indicator tends to generate false signals, causing unnecessary entries.

  2. Incorrect Hull MA parameter settings may also misjudge the trend.

  3. Improper combination of the 3 indicators may interfere with each other.

Risks can be mitigated by optimizing Hull MA parameters, adjusting STC parameter mix, testing UT Bot parameters.

In addition, stop loss can be used to control single trade loss. More indicators can be introduced for combo verification to reduce false signal rates.

Optimization Directions

The strategy can be optimized in the following aspects:

  1. Optimize Hull MA parameters to find the optimal length for the smooth curve to fit the trend better.

  2. Adjust STC parameter mix to find more accurate combinations for detecting reversals.

  3. Optimize UT Bot parameters to improve trend judgment accuracy.

  4. Test introducing other indicators for combo verification to further improve signal reliability.

  5. Optimize stop loss strategy to keep profits while controlling single trade loss within acceptable range.

  6. Optimize position sizing strategy for higher reward/risk ratios.

Conclusion

The strategy precisely tracks the trend by combining Hull MA, STC and UT Bot indicators. It has the advantage of indicator diversity, which reduces misjudgment risks and enhances stability. The strategy can be further improved by continuously optimizing parameters, introducing other indicators, perfecting stop loss strategies etc.

[/trans]

Strategy Arguments

Argument Default Description
v_input_1 2 Key Vaule. 'This changes the sensitivity'
v_input_2 6 ATR Period
v_input_3 false Signals from Heikin Ashi Candles
v_input_4 false ░░░░░░░░░░░░░░░░░░░░░░░░░
v_input_5 80 Length
v_input_6 27 FastLength
v_input_7 50 SlowLength
v_input_8 0.5 AAA
v_input_9 false ░░░░░░░░░░░░░░░░░░░░░░░░░
v_input_10_close 0 Source: close
v_input_string_1 0 Hull Variation: Hma
v_input_11 55 Length(180-200 for floating S/R , 55 for swing entry)
v_input_12 true Length multiplier (Used to view higher timeframes with straight band)
v_input_13 false Show Hull MA from X timeframe? (good for scalping)
v_input_timeframe_1 240 Higher timeframe
v_input_14 true Color Hull according to trend?
v_input_15 false Color candles based on Hull's Trend?
v_input_16 true Show as a Band?
v_input_17 true Line Thickness
v_input_int_1 40 Band Transparency
v_input_bool_1 true (?Date Range)Start
v_input_18 timestamp(1 Jan 2019) startPeriodTime
v_input_bool_2 true End
v_input_19 timestamp(31 Dec 2030) endPeriodTime
v_input_string_2 0 (?Trade Direction)Trade Direction: Long and Short
v_input_float_1 100 (?Take Profit)Take Profit 1 - Target %
v_input_int_2 100 % Of Position
v_input_float_2 100 Take Profit 2 - Target %
v_input_int_3 100 % Of Position
v_input_float_3 100 Take Profit 3 - Target %
v_input_int_4 100 % Of Position
v_input_float_4 100 Take Profit 4 - Target %
v_input_float_5 15 (?Stop Loss)Stop Loss (%)
v_input_float_6 true (?Leverage)Leverage
v_input_string_3 PV-AccountNameHere_Strategy-Name-Here (?ProfitView Alert Syntax)Alert Syntax Prefix

Source (PineScript)

/*backtest
start: 2023-09-06 00:00:00
end: 2023-10-06 00:00:00
period: 1h
basePeriod: 15m
exchanges: [{"eid":"Futures_Binance","currency":"BTC_USDT"}]
*/

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © myn

//@version=5
strategy('Strategy Myth-Busting #1 - UT Bot+STC+Hull+ [MYN]', max_bars_back=5000, overlay=true, pyramiding=0, initial_capital=20000, currency='USD', default_qty_type=strategy.percent_of_equity, default_qty_value=100.0, commission_value=0.075)




/////////////////////////////////////
//* Put your strategy logic below *//
/////////////////////////////////////
//2oVDibie_bk

/// UT Bot Alerts by QuantNomad - https://www.tradingview.com/script/n8ss8BID-UT-Bot-Alerts/
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
//study(title="UT Bot Alerts", overlay = true)

// Inputs
a = input(2, title='Key Vaule. \'This changes the sensitivity\'')
c = input(6, title='ATR Period')
h = input(false, title='Signals from Heikin Ashi Candles')

xATR = ta.atr(c)
nLoss = a * xATR

src = h ? request.security(ticker.heikinashi(syminfo.tickerid), timeframe.period, close, lookahead=barmerge.lookahead_off) : close

xATRTrailingStop = 0.0
iff_1 = src > nz(xATRTrailingStop[1], 0) ? src - nLoss : src + nLoss
iff_2 = src < nz(xATRTrailingStop[1], 0) and src[1] < nz(xATRTrailingStop[1], 0) ? math.min(nz(xATRTrailingStop[1]), src + nLoss) : iff_1
xATRTrailingStop := src > nz(xATRTrailingStop[1], 0) and src[1] > nz(xATRTrailingStop[1], 0) ? math.max(nz(xATRTrailingStop[1]), src - nLoss) : iff_2

pos = 0
iff_3 = src[1] > nz(xATRTrailingStop[1], 0) and src < nz(xATRTrailingStop[1], 0) ? -1 : nz(pos[1], 0)
pos := src[1] < nz(xATRTrailingStop[1], 0) and src > nz(xATRTrailingStop[1], 0) ? 1 : iff_3

xcolor = pos == -1 ? color.red : pos == 1 ? color.green : color.blue

ema = ta.ema(src, 1)
above = ta.crossover(ema, xATRTrailingStop)
below = ta.crossover(xATRTrailingStop, ema)

buy = src > xATRTrailingStop and above
sell = src < xATRTrailingStop and below

barbuy = src > xATRTrailingStop
barsell = src < xATRTrailingStop

//plotshape(buy,  title = "Buy",  text = 'Buy',  style = shape.labelup,   location = location.belowbar, color= color.green, textcolor = color.white, transp = 0, size = size.tiny)
//plotshape(sell, title = "Sell", text = 'Sell', style = shape.labeldown, location = location.abovebar, color= color.red,   textcolor = color.white, transp = 0, size = size.tiny)

barcolor(barbuy ? color.green : na)
barcolor(barsell ? color.red : na)

alertcondition(buy, 'UT Long', 'UT Long')
alertcondition(sell, 'UT Short', 'UT Short')

///////////////////////////////////////////////
//======[ Position Check (long/short) ]======//
///////////////////////////////////////////////

last_longCondition = float(na)
last_shortCondition = float(na)
last_longCondition := buy ? time : nz(last_longCondition[1])
last_shortCondition := sell ? time : nz(last_shortCondition[1])

in_longCondition = last_longCondition > last_shortCondition
in_shortCondition = last_shortCondition > last_longCondition


UTBotBuyZone = in_longCondition
UTBotSellZone = in_shortCondition



/// STC Indicator - A Better MACD [SHK] By shayankm - https://www.tradingview.com/script/WhRRThMI-STC-Indicator-A-Better-MACD-SHK/

// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
//[SHK] STC colored indicator
//https://www.tradingview.com/u/shayankm/

//indicator(title='[SHK] Schaff Trend Cycle (STC)', shorttitle='STC', overlay=false)
STCDivider = input(false, '░░░░░░░░░░░░░░░░░░░░░░░░░')
EEEEEE = input(80, 'Length')
BBBB = input(27, 'FastLength')
BBBBB = input(50, 'SlowLength')

AAAA(BBB, BBBB, BBBBB) =>
    fastMA = ta.ema(BBB, BBBB)
    slowMA = ta.ema(BBB, BBBBB)
    AAAA = fastMA - slowMA
    AAAA

AAAAA(EEEEEE, BBBB, BBBBB) =>
    AAA = input(0.5)
    var CCCCC = 0.0
    var DDD = 0.0
    var DDDDDD = 0.0
    var EEEEE = 0.0
    BBBBBB = AAAA(close, BBBB, BBBBB)
    CCC = ta.lowest(BBBBBB, EEEEEE)
    CCCC = ta.highest(BBBBBB, EEEEEE) - CCC
    CCCCC := CCCC > 0 ? (BBBBBB - CCC) / CCCC * 100 : nz(CCCCC[1])
    DDD := na(DDD[1]) ? CCCCC : DDD[1] + AAA * (CCCCC - DDD[1])
    DDDD = ta.lowest(DDD, EEEEEE)
    DDDDD = ta.highest(DDD, EEEEEE) - DDDD
    DDDDDD := DDDDD > 0 ? (DDD - DDDD) / DDDDD * 100 : nz(DDDDDD[1])
    EEEEE := na(EEEEE[1]) ? DDDDDD : EEEEE[1] + AAA * (DDDDDD - EEEEE[1])
    EEEEE

mAAAAA = AAAAA(EEEEEE, BBBB, BBBBB)
mColor = mAAAAA > mAAAAA[1] ? color.new(color.green, 20) : color.new(color.red, 20)



if mAAAAA[3] <= mAAAAA[2] and mAAAAA[2] > mAAAAA[1] and mAAAAA > 75
    alert('Red', alert.freq_once_per_bar)
if mAAAAA[3] >= mAAAAA[2] and mAAAAA[2] < mAAAAA[1] and mAAAAA < 25
    alert('Green', alert.freq_once_per_bar)


//plot(mAAAAA, color=mColor, title='STC', linewidth=2)

//ul = plot(25, color=color.new(color.white, 0 ))
//ll = plot(75, color=color.new(color.purple, 0))
//fill(ul, ll, color=color.new(color.gray, 96))

STCGreenAndBelow25AndRising = mAAAAA > mAAAAA[1] and mAAAAA < 25
STCRedAndAndAbove75AndFalling = mAAAAA < mAAAAA[1] and mAAAAA > 75

/// Hull Suite by InSilico
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
//Basic Hull Ma Pack tinkered by InSilico - https://www.tradingview.com/script/hg92pFwS-Hull-Suite/
//study("Hull Suite by InSilico", overlay=true)

HullDivider = input(false, '░░░░░░░░░░░░░░░░░░░░░░░░░')
//INPUT
srcHull = input(close, title='Source')
modeSwitch = input.string('Hma', title='Hull Variation', options=['Hma', 'Thma', 'Ehma'])
length = input(55, title='Length(180-200 for floating S/R , 55 for swing entry)')
lengthMult = input(1.0, title='Length multiplier (Used to view higher timeframes with straight band)')

useHtf = input(false, title='Show Hull MA from X timeframe? (good for scalping)')
htf = input.timeframe('240', title='Higher timeframe')

switchColor = input(true, 'Color Hull according to trend?')
candleCol = input(false, title='Color candles based on Hull\'s Trend?')
visualSwitch = input(true, title='Show as a Band?')
thicknesSwitch = input(1, title='Line Thickness')
transpSwitch = input.int(40, title='Band Transparency', step=5)

//FUNCTIONS
//HMA
HMA(_src, _length) =>
    ta.wma(2 * ta.wma(_src, _length / 2) - ta.wma(_src, _length), math.round(math.sqrt(_length)))
//EHMA    
EHMA(_src, _length) =>
    ta.ema(2 * ta.ema(_src, _length / 2) - ta.ema(_src, _length), math.round(math.sqrt(_length)))
//THMA    
THMA(_src, _length) =>
    ta.wma(ta.wma(_src, _length / 3) * 3 - ta.wma(_src, _length / 2) - ta.wma(_src, _length), _length)

//SWITCH
Mode(modeSwitch, src, len) =>
    modeSwitch == 'Hma' ? HMA(src, len) : modeSwitch == 'Ehma' ? EHMA(src, len) : modeSwitch == 'Thma' ? THMA(src, len / 2) : na

//OUT
_hull = Mode(modeSwitch, srcHull, int(length * lengthMult))
HULL = useHtf ? request.security(syminfo.ticker, htf, _hull) : _hull
MHULL = HULL[0]
SHULL = HULL[2]

//COLOR
hullColor = switchColor ? HULL > HULL[2] ? #00ff00 : #ff0000 : #ff9800

//PLOT
///< Frame
Fi1 = plot(MHULL, title='MHULL', color=hullColor, linewidth=thicknesSwitch, transp=50)
Fi2 = plot(visualSwitch ? SHULL : na, title='SHULL', color=hullColor, linewidth=thicknesSwitch, transp=50)
alertcondition(ta.crossover(MHULL, SHULL), title='Hull trending up.', message='Hull trending up.')
alertcondition(ta.crossover(SHULL, MHULL), title='Hull trending down.', message='Hull trending down.')
///< Ending Filler
fill(Fi1, Fi2, title='Band Filler', color=hullColor, transp=transpSwitch)
///BARCOLOR
barcolor(color=candleCol ? switchColor ? hullColor : na : na)

HullGreen = hullColor == #00ff00
HullRed = hullColor == #ff0000

//////////////////////////////////////
//* Put your strategy rules below *//
/////////////////////////////////////



longCondition = STCGreenAndBelow25AndRising and HullGreen and UTBotBuyZone
shortCondition = STCRedAndAndAbove75AndFalling and HullRed and UTBotSellZone

//define as 0 if do not want to use
closeLongCondition = 0
closeShortCondition = 0


//░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
useStartPeriodTime = input.bool(true, 'Start', group='Date Range', inline='Start Period')
startPeriodTime = input(timestamp('1 Jan 2019'), '', group='Date Range', inline='Start Period')
useEndPeriodTime = input.bool(true, 'End', group='Date Range', inline='End Period')
endPeriodTime = input(timestamp('31 Dec 2030'), '', group='Date Range', inline='End Period')

start = useStartPeriodTime ? startPeriodTime >= time : false
end = useEndPeriodTime ? endPeriodTime <= time : false
calcPeriod = not start and not end

// Trade Direction 
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
tradeDirection = input.string('Long and Short', title='Trade Direction', options=['Long and Short', 'Long Only', 'Short Only'], group='Trade Direction')

// Percent as Points
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
per(pcnt) =>
    strategy.position_size != 0 ? math.round(pcnt / 100 * strategy.position_avg_price / syminfo.mintick) : float(na)

// Take profit 1
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
tp1 = input.float(title='Take Profit 1 - Target %', defval=100, minval=0.0, step=0.5, group='Take Profit', inline='Take Profit 1')
q1 = input.int(title='% Of Position', defval=100, minval=0, group='Take Profit', inline='Take Profit 1')

// Take profit 2
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
tp2 = input.float(title='Take Profit 2 - Target %', defval=100, minval=0.0, step=0.5, group='Take Profit', inline='Take Profit 2')
q2 = input.int(title='% Of Position', defval=100, minval=0, group='Take Profit', inline='Take Profit 2')

// Take profit 3
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
tp3 = input.float(title='Take Profit 3 - Target %', defval=100, minval=0.0, step=0.5, group='Take Profit', inline='Take Profit 3')
q3 = input.int(title='% Of Position', defval=100, minval=0, group='Take Profit', inline='Take Profit 3')

// Take profit 4
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
tp4 = input.float(title='Take Profit 4 - Target %', defval=100, minval=0.0, step=0.5, group='Take Profit')

/// Stop Loss
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
stoplossPercent = input.float(title='Stop Loss (%)', defval=15, minval=0.01, group='Stop Loss') * 0.01
slLongClose = close < strategy.position_avg_price * (1 - stoplossPercent)
slShortClose = close > strategy.position_avg_price * (1 + stoplossPercent)

/// Leverage
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░
leverage = input.float(1, 'Leverage', step=.5, group='Leverage')
contracts = math.min(math.max(.000001, strategy.equity / close * leverage), 1000000000)


/// Trade State Management
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

isInLongPosition = strategy.position_size > 0
isInShortPosition = strategy.position_size < 0

/// ProfitView Alert Syntax String Generation
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

alertSyntaxPrefix = input.string(defval='PV-AccountNameHere_Strategy-Name-Here', title='Alert Syntax Prefix', group='ProfitView Alert Syntax')
alertSyntaxBase = alertSyntaxPrefix + '\n#' + str.tostring(open) + ',' + str.tostring(high) + ',' + str.tostring(low) + ',' + str.tostring(close) + ',' + str.tostring(volume) + ','


/// Trade Execution
// ░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░░

if calcPeriod
    if longCondition and tradeDirection != 'Short Only' and isInLongPosition == false
        strategy.entry('Long', strategy.long, qty=contracts)

        alert(message=alertSyntaxBase + 'side:long', freq=alert.freq_once_per_bar_close)

    if shortCondition and tradeDirection != 'Long Only' and isInShortPosition == false
        strategy.entry('Short', strategy.short, qty=contracts)

        alert(message=alertSyntaxBase + 'side:short', freq=alert.freq_once_per_bar_close)
    //Inspired by Multiple %% profit exits example By adolgo https://www.tradingview.com/script/kHhCik9f-Multiple-profit-exits-example/
    strategy.exit('TP1', qty_percent=q1, profit=per(tp1))
    strategy.exit('TP2', qty_percent=q2, profit=per(tp2))
    strategy.exit('TP3', qty_percent=q3, profit=per(tp3))
    strategy.exit('TP4', profit=per(tp4))

    strategy.close('Long', qty_percent=100, comment='SL Long', when=slLongClose)
    strategy.close('Short', qty_percent=100, comment='SL Short', when=slShortClose)

    strategy.close_all(when=closeLongCondition or closeShortCondition, comment='Close Postion')

Detail

https://www.fmz.com/strategy/428580

Last Modified

2023-10-07 10:20:06

Reference in New Issue View Git Blame Copy Permalink