mirror of
https://github.com/chainstacklabs/pumpfun-bonkfun-bot.git
synced 2026-11-02 06:16:10 +00:00
* feat(cookbook): cover every create_v2 coin parameter in the launch scripts Both create scripts now build create_v2 through pumpfun_instructions_v2 instead of each carrying their own copy of the discriminators, PDAs and account list. - A holder-reward coin's curve creator is derived rather than assumed, so the opening buy finds the matching creator vault instead of reverting. - create_v2's three trailing arguments are settable independently. None omits an argument, a value sends it, so all four wire forms are reachable and an explicit default is distinct from an omission. - create_v2 carries all four remaining accounts, quote_control included. Without them the program ignores creator_fee_bps. - --creator, --creator-fee-bps and --quote-mint added. A creator fee on a SOL-paired coin warns, because the program stores zero for it; the create-and-buy script refuses one outright before sending anything. - The opening buy is sized from Global's reserves and fee rates. - Mayhem mode is off by default. Removes the fee-recipient lookup whose result was discarded and the buy wrapper whose parameters were unused. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * test(regression): verify the launch path's create_v2 arguments Eight offline checks: the substituted creator on a holder-reward coin, every committed create_v2 fixture round-tripping through the trailing argument encoder, all four wire forms being reachable, --creator reaching the wire, the opening buy following Global rather than constants, the Global decoder stopping cleanly on a short buffer, and the four quote accounts being present with the ATA under the quote mint's own program. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * docs: correct create_v2's remaining accounts and the creator-fee rule create_v2 takes four remaining accounts, not three; the fourth is the QuoteControl PDA. Omitting them is accepted and yields a SOL-paired coin, which is also how a creator fee goes missing: the program applies creator_fee_bps only to a coin priced in something other than SOL, and otherwise stores zero without an error. Also records that solders documents TransactionConfig.priority_fee as micro-lamports while SIMD-0385 defines the field as total lamports. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(cookbook): price a new coin in an asset other than SOL --quote-mint on both create scripts, checked against both registries that admit a quote asset. QuoteControl carries most of them with a per-mint opening reserve; Global.whitelisted_quote_mints carries USDC, which QuoteControl does not list, so consulting either alone refuses a mint the program accepts. A mint neither admits is refused rather than priced from a default, since the opening reserve spans orders of magnitude. The quote mint's token program and decimals are resolved from chain, and --amount is denominated in the quote asset rather than in SOL. A paused mint is refused before anything is sent, and a scaled-UI mint says so, because amounts here are raw units. A creator fee now works, since pump.fun applies one only to a coin priced in something other than SOL. On a SOL-paired coin it is refused instead of being accepted and stored as zero. The create-and-buy script requires the wallet to already hold the quote asset; it does not acquire one. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(cookbook): launch a coin in one v1 transaction Create, extend, the buyer's token account and the buy now travel under a single signature, so nobody can buy between the create and the opening buy. They were split because the two together are 1479 bytes against the 1232 a v0 transaction is held to; SIMD-0296 raised the limit to 4096 for v1 and the combined message uses about a third of it. v1 has no address lookup tables -- the larger limit exists so the whole account list goes inline -- and it carries the compute budget in the message header, so the script sends no ComputeBudget instructions. The priority fee is now one total in lamports rather than micro-lamports per compute unit; the constant is converted, not renamed. The two-transaction path is removed rather than kept behind a flag. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(cookbook): state the loaded-accounts data size limit on the v1 launch A v1 message carries this limit in its header, and left unset it is zero rather than the network default, so the runtime rejects the transaction for exceeding it. The launch skips preflight, so the rejection never reached the caller: send returned a signature that never landed. Measured against a forked mainnet, the launch is rejected at 128 KiB and lands at 256 KiB. The limit is set to 1 MiB, which leaves room for a quote mint whose accounts are larger, and the verifier fails if it is dropped or set at or below the measured failing size. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(cookbook): offer the launch as a v0 or a v1 transaction The Solana transaction version changes what a launch can be, so it is the script that changes rather than a flag on one of them. _txv1 sends create and buy under a single signature, so the coin is bought by the transaction that creates it. _txv0 sends them as two transactions, because together they do not fit what a v0 transaction can carry, and anyone watching the create can buy in the gap. Use it when the endpoint will not take a v1 send. The coin is identical either way: quote asset, creator fee, holder rewards and mayhem mode all behave the same. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * refactor(cookbook): drop the instruction version from script names The cookbook ships one form of each pump.fun action, so `_v2` in a basename distinguished nothing — and it read as a Solana transaction version, which is a different thing and now appears in the same names. `pumpfun_buy_token_exact_sol_in.py` already went without it. Every trade script loses the suffix, the shared module becomes `pumpfun_instructions.py`, and the retired path is named for what it is rather than for the instruction set it uses. The instruction each script builds is named in its docstring, where it cannot be mistaken for a transaction version. `txv0`/`txv1` is now the only version marker in any filename, and it is the one the reader chooses between. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(cookbook): refuse mayhem mode paired with a non-SOL quote asset The program rejects the pairing with MayhemModeQuoteMintNotAllowed (6071), so a mayhem coin is always SOL-paired — and therefore can never carry a creator fee, which needs a non-SOL quote. Both create scripts now refuse the combination before sending, rather than letting it land as a reverted transaction that has already cost fees. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(cookbook): size the v1 loaded-accounts limit for what mainnet loads The limit counts the executable data of every program a transaction touches, not just the accounts it names, and the pump program's own code is the bulk of it. The previous figure was set against a local fork, which does not charge for executables; on mainnet the launch was rejected with MaxLoadedAccountsDataSizeExceeded. Set to the network default a v0 transaction gets when nothing narrows it, which is the behaviour being reproduced. The verifier now holds the mainnet figure as its floor. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(cookbook): a creator fee needs a QuoteControl quote mint, not just a non-SOL one Measured on mainnet: the fee is applied on a coin priced in a mint QuoteControl admits, whether that mint is SPL Token or Token-2022, and is not applied on wrapped SOL or on USDC — which the older Global whitelist carries and QuoteControl does not. The deciding property is registry membership, so the previous check let a USDC-priced coin through and the program stored zero without an error. Also stops the sell script calling a price "SOL" when the curve is priced in something else. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * feat(cookbook): offer the create-only script as a v0 or a v1 transaction Same split as the create-and-buy pair, for the same reason: the Solana transaction version is the reader's choice, so it is the script that changes rather than a flag. _txv1 carries the compute budget in the message header and sends no ComputeBudget instructions; _txv0 sends them. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(cookbook): refuse a paused quote mint on the create-and-buy path too The check only ran in the create-only scripts, so a launch that also buys could reach the chain with a quote mint whose transfers are paused. On the two-transaction path that leaves a created coin nobody bought, after the create has already cost rent. Also corrects the v1 script's run docstring, which still described two transactions and a spend denominated in SOL. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> * fix(cookbook): say --amount is in whole quote units, not raw ones The scaled-UI notice told the reader the opposite of what the scripts do: --amount is multiplied by the mint's decimals, so it is a whole-token figure. A reader who followed the notice would have overspent by a factor of the decimals. Reworded so the multiplier is described as what it is — a display scale a wallet applies — rather than as something the amount has to account for. The create-only scripts carried the same wording without even taking an amount. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Claude Opus 5 (1M context) <noreply@anthropic.com>
147 lines
5.1 KiB
Python
147 lines
5.1 KiB
Python
"""Pay out the cashback your trading has accrued.
|
|
|
|
WARNING: this submits a real transaction and spends real funds (the network fee).
|
|
|
|
Usage:
|
|
uv run cookbook/pumpfun/trade/pumpfun_claim_cashback.py
|
|
uv run cookbook/pumpfun/trade/pumpfun_claim_cashback.py --quote <QUOTE_MINT>
|
|
uv run cookbook/pumpfun/trade/pumpfun_claim_cashback.py --user <PUBKEY>
|
|
|
|
Trading a cashback coin credits your `user_volume_accumulator`, and this moves
|
|
what has built up there into your token account.
|
|
|
|
`create_v2` rejects `is_cashback_enabled = true` with error 6082
|
|
`CashbackDeprecated`, so no new cashback coin can be minted. Coins created
|
|
earlier keep trading, keep accruing and stay claimable, which is why this path
|
|
and the cashback handling elsewhere in this repo are not dead code.
|
|
|
|
As with creator fees, the accumulator is per quote asset, and the instruction
|
|
takes no signer: the funds can only reach the wallet they belong to, so anyone
|
|
may run it for anyone. `--user` claims on someone else's behalf, at your expense
|
|
for the network fee.
|
|
"""
|
|
|
|
import argparse
|
|
import asyncio
|
|
import os
|
|
import sys
|
|
from pathlib import Path
|
|
|
|
# solana_transaction_status.py lives in cookbook/solana/; pumpfun_instructions.py
|
|
# sits beside this file.
|
|
sys.path.insert(0, str(Path(__file__).resolve().parents[2] / "solana"))
|
|
|
|
import base58
|
|
import pumpfun_instructions as pump
|
|
import solana_transaction_status as tx_status
|
|
from dotenv import load_dotenv
|
|
from solana.rpc.async_api import AsyncClient
|
|
from solana.rpc.commitment import Confirmed
|
|
from solana.rpc.core import TxOptsModel
|
|
from solders.compute_budget import set_compute_unit_price
|
|
from solders.keypair import Keypair
|
|
from solders.message import MessageV0
|
|
from solders.pubkey import Pubkey
|
|
from solders.transaction import VersionedTransaction
|
|
|
|
load_dotenv()
|
|
|
|
RPC_ENDPOINT = os.environ.get("SOLANA_NODE_RPC_ENDPOINT")
|
|
PRIVATE_KEY = os.environ.get("SOLANA_PRIVATE_KEY")
|
|
|
|
PRIORITY_FEE_MICROLAMPORTS = 1_000
|
|
|
|
|
|
async def claim(user: Pubkey, quote_mint: Pubkey, *, dry_run: bool) -> None:
|
|
"""Pay out one user's accrued cashback for one quote asset.
|
|
|
|
Args:
|
|
user: Wallet whose cashback to claim
|
|
quote_mint: Quote asset the cashback accrued in
|
|
dry_run: Simulate instead of submitting
|
|
"""
|
|
payer = Keypair.from_bytes(base58.b58decode(PRIVATE_KEY))
|
|
|
|
async with AsyncClient(RPC_ENDPOINT) as client:
|
|
|
|
async def get_account(address: Pubkey) -> object:
|
|
response = await client.get_account_info(address, encoding="base64")
|
|
if response.value is None:
|
|
raise ValueError(f"Account not found: {address}")
|
|
return response.value
|
|
|
|
quote_token_program = await pump.resolve_quote_token_program(
|
|
quote_mint, get_account
|
|
)
|
|
accumulator = pump.find_user_volume_accumulator(user)
|
|
|
|
print(f"User: {user}")
|
|
print(f"Quote asset: {quote_mint}")
|
|
print(f"Accumulator: {accumulator}")
|
|
|
|
response = await client.get_account_info(accumulator, encoding="base64")
|
|
if response.value is None:
|
|
print(
|
|
"\nNo volume accumulator — this wallet has not traded a cashback coin."
|
|
)
|
|
return
|
|
|
|
instructions = [
|
|
set_compute_unit_price(PRIORITY_FEE_MICROLAMPORTS),
|
|
pump.build_claim_cashback_v2_instruction(
|
|
user=user,
|
|
quote_mint=quote_mint,
|
|
quote_token_program_id=quote_token_program,
|
|
),
|
|
]
|
|
blockhash = (await client.get_latest_blockhash()).value.blockhash
|
|
transaction = VersionedTransaction(
|
|
MessageV0.try_compile(payer.pubkey(), instructions, [], blockhash), [payer]
|
|
)
|
|
|
|
if dry_run:
|
|
result = await client.simulate_transaction(transaction)
|
|
print(f"\nSimulated: error={result.value.err}")
|
|
print(f"Compute units: {result.value.units_consumed}")
|
|
return
|
|
|
|
signature = (
|
|
await client.send_transaction(
|
|
transaction,
|
|
opts=TxOptsModel(skip_preflight=True, preflight_commitment=Confirmed),
|
|
)
|
|
).value
|
|
print(f"Sent: https://explorer.solana.com/tx/{signature}")
|
|
await tx_status.confirm_and_assert(client, signature)
|
|
print("Confirmed")
|
|
|
|
|
|
def main() -> None:
|
|
"""Parse the command line and claim."""
|
|
parser = argparse.ArgumentParser(description="Claim accrued cashback")
|
|
parser.add_argument("--user", help="Wallet to claim for (defaults to your own)")
|
|
parser.add_argument(
|
|
"--quote", help="Quote mint the cashback accrued in (default SOL)"
|
|
)
|
|
parser.add_argument(
|
|
"--dry-run", action="store_true", help="Simulate instead of submitting"
|
|
)
|
|
args = parser.parse_args()
|
|
|
|
user = (
|
|
Pubkey.from_string(args.user)
|
|
if args.user
|
|
else Keypair.from_bytes(base58.b58decode(PRIVATE_KEY)).pubkey()
|
|
)
|
|
quote_mint = (
|
|
pump.normalize_quote_mint(Pubkey.from_string(args.quote))
|
|
if args.quote
|
|
else pump.WSOL_MINT
|
|
)
|
|
|
|
asyncio.run(claim(user, quote_mint, dry_run=args.dry_run))
|
|
|
|
|
|
if __name__ == "__main__":
|
|
main()
|